Electrical enclosure is an interesting product to study further as it involves a range of possibilities in terms of materials used to fabricate, the design and the application are also cool to explore in-depth by players in this sector. For instance, in the server room to most of the companies, an enclosure will be built to protect intruders from damaging it, as a safety precaution. At the same time, internal staffs’ negligence to alert and accidentally touch the fragile setup that is sensitive can also be prevented. Enclosure's main purpose is achievable when the size, material, specification are made according to the common requirement of what is going to be stored there. For instance, some materials need to be transparent so you can see what’s happening in there, just in case those are not what you always inspect by opening it, bypassers who are not in-charged can also be your eye and ear to spot contingency.
However, not every enclosure shall be installed with materials that allow you to see what is inside because it might affect privacy as well as security. Some even need to add in the lockset or passcode to make sure the highest level of protection can be there. Many enclosures nowadays can be prefabricated without the worry of the unstandardized quality, suppliers usually have few models for consumers to opt for the best that fits their wants. There should be also free of ventilation issue kind in the enclosure, complete blocks of vision should not be an air exchange-obstructive design, because electronic or electrical pieces of stuff tend to heat up very quickly and if not, potential severe risks such as spark that causes burning further will create subsequent losses in terms of financial, health, safety as well operational flows that make stakeholders including customers, employees, suppliers, sub-contractors and owners being affected tremendously. Materials should also be carefully evaluated, compared and specified in terms of sustainability, cost, duration to fabricate, appealing design, size feasibility, space consumption and more.
By the definition of many sources, an electrical enclosure is actually a box either presented in a rectangular, square or cabinet-structured that can protect electronic and electrical (E&E) devices, equipment, cabling, switches, circuit breakers, contactor, control panels in order to overcome the exposure to foreign objects, electrical shocks and any other risk factors. Some of the popular types of enclosures include Totally Enclosed Non-Ventilated (TENV), Totally Enclosed Forced Ventilated (TEFV), Weather Protected (WP1 / WP2), XP (Explosion Proof), Totally Enclosed Fan Cooled (TEFC), Open Drip Proof (ODP), Totally Enclosed Air Over (TEAO). Either semi-closed or known as semi-opened, these are to save cost if the ventilation requirement is not a lot due to the heating temperature of whatever needed to invest in a cooling fan. It can also prevent the contents from circumstances to interrupt the internal part. The shock, vibration, temperature, humidity, corrosive, human error and other incidents can be safeguarded.
Where to Mechanical & Electrical Enclosure Supplier and Contractor in Malaysia
Aathaworld Sdn Bhd fabricates and offers a wide range of enclosure systems that can be installed into many industries’ players, from pharmaceutical, beverage processing, cosmetic line, clean room, engine oil production, server room, data center, school, power generation plant, electronic manufacturing, food & beverage (F&B) to building. As a enclosure set supplier, installer (contractor) in Malaysia, we are able to provide a full service design, engineering, welding, produce, service and install for your building and factories, covering new or existing projects for commercial building, manufacturing plants, office, production site and other industries in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; Most of the time, we are also able to be your M&E Enclosure system supplier and outsourced builder for other countries in Southeast Asia (SEA) such as Singapore, Myanmar (Burma), Cambodia, Vietnam, Laos, Thailand, Indonesia, Philippines, Brunei, Bangladesh as well as China, Taiwan, Hong Kong, Australia and New Zealand.
Enquire your enclosure fabrication sourcing requirements (supply and install), either you are looking for a supplier or contractor for a new system or upgrading services in KL Kuala Lumpur, Selangor or other states in Malaysia. Submit your M&E system protection for hassle-free customize requirements enquiry now to info@aathaworld.com or call (WhatsApp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holidays).
Photo credit: polycase, malloyelectric, 2henergy.fptindustria, twcontrols, bisonprofab
