Aathaworld Sdn Bhd, construction and industrial aluminium supplier Malaysia who can do design, engineering and fabricate aluminium products such as aluminium sheet, plate, tank, pipe, elbow, roofing and many other types of aluminium products. Aluminium product range is very wide and it covers basically things can and cannot be done by steel too, from heavy duty to light duty such as consumer goods.
In addition to manufacturing the aluminium products, as a comprehensive aluminium supplier in Malaysia, we are also able to act as contractor when it comes to installation and aluminium equipment upkeep works in the building or production plants. As per mentioned above, aluminium is everywhere due to its obvious and well agreed advantages that will be elaborated later in this article. We target to be professional aluminium supplier Malaysia who bring best quality of aluminium custom made products, covering KL Kuala Lumpur, Selangor, Klang Valley and other states of Malaysia.
Aluminium has the widest distribution when compared to other kind of metals, it forms up nearly 10% of the core mass in the Earth; statiscally shown that aluminium is also ranked third after silicon and oxygen as the top few most common element in chemical substances right after silicon and oxygen. Aluminium supplier Malaysia normally will process the silvery-white metal into other finished goods ready for multiple application and mass production carried out around year 1900 after approximately five decades of learning to be used on industrial production scale.
Benefits of Aluminium
Aluminium supplier Malaysia is doing pretty well because of its natural properties, especially due to the main feature which it falls under one of the least weighted metal globally. Comparing it to iron, it has lesser in weight but yet with competitive strength, corrosion resistant and flexible. Aluminium performs well in resistance against corrosion mainly because it has solid and thin oxide film layer, while do not magnetize as well as good conductor in term of electricity and subsequently form alloy with all other potential metals.
Cold and hot rolled method can also be performed by aluminium fabricator in Malaysia using appropriate pressure, easier than many other metal products. Besides that, aluminium does not require any unique coating since aluminium has fire-retardant feature and it creates no toxic substances in which plastic nature product does.
Similar to plywood sheet, aluminium can add on as many ply as per requirement, i.e. 4 microns thickness. Aluminium manufacturer Malaysia also claims that human hair is even few times thicker than aluminium extra-thin foil, the strength-to-thickness ratio is cost effective. The cost efficiency of aluminium allows automobile industry to use it dramatically too, just like the consumer goods production such as IT electronics products.
Additionally, aluminium manufacturer in Malaysia does able to cater also for other industries such as food & beverage, power generation, aviation, construction and industrial. Generally speaking, the production filed cannot work efficiently if raw material such as aluminium did not exist and cannot be produced in a relatively low cost method. Aluminium production is similar to steel manufacturing, factory worker has to follow strictly to the customer’s requirement, therefore, users in different industries should pay high confidence in aluminium producer as they will have realiable production procedure from supply of raw material, manufacturing to quality control process.
Aluminium Application
Copper is also one of the common materials used in industrial and construction, but aluminium is having less than a quarter of copper’s weight but having more double of copper’s conductivity. Aluminium supplier Malaysia typically can conclude confidently copper is more expensive than aluminium when project requirement is more toward conductivity-to-weight. According to aluminium specialist in Malaysia, more than seventy percent of aluminium products created in the world are still being utilized in the global market today.
Aluminium is so popular besides it is cheaper than many metals in the heavy industry, it is also lighter than iron by at least triple ratio.
Aluminium manufacturer in Malaysia stands relatively firm when it is being compared to steel, due to the strength-to-weight properties of aluminium. Aluminium is having rigid properties and at the same time, it is superior in weight where steel might not be achieving.
Especially automotive industry, aluminium manufacturer Malaysia able to achieve low weight with the appropriate strength-to-cost ratio. Vehicle made by mainly aluminium can also achieve low fuel cost since aluminium-shelf vehicle can now enjoy lower fixed body weight when it moves on the road. At the same time, aluminium supplier Malaysia can also achieve high insulation values when it comes to thermal isolation and special requirement by customer who needs sound blockage. For example, in the aviation industry where airplane body is mostly built by aluminium material, as aluminium provides lightweight casing, high insulation value as well as long-lasting surface beautification.
Aluminium can also be recycled by aluminium supplier in Malaysia where it indirectly translate into lower carbon emission, lower energy consumption as they use lesser energy to convert raw material into finished ready-to-use aluminium products. In the perspective of economy and employment, production contributes a lot to the country because the workers and the demand of this aluminium production is still relatively high.
Last but not least, aluminium fabricator Malaysia able to offer durable aluminium product as per steel’s performance. At the same time, they can also achieve ductible aluminium feature where any shape, pattern and strength can be pre-designed, fabricated and installed. Furtnermore, aluminium surface can also be applied with a corrosion-resistant layer where not all the metals can perform such feature. Aluminium fabricator in Malaysia enables the formation of aluminium formwork, aluminium equipment in both building and mechanical industries.
Where to Get Fabricator and Engineering Factory in Malaysia
Aathaworld Sdn Bhd can supply many types of metal, steel, aluminium and other custom made fabrication for indoor and outdoor, construction, consumer goods, industrial, light and heavy industrial usage, plant and factories, decorative façade, customizable specification to make sure you have the best quality fabrication and supply in Malaysia to fit your requirement. As a custom made engineering products supplier in Malaysia, we are able to provide customize specification, stainless steel, mild steel, sheet metal, precision metal fabrication, piping fabrication, bolt and nut fabrication, gear fabrication, flanges fabrication, aluminium, aluminium plate, aluminium roll, aluminium tank, aluminium casing, steel plate rolling, welding, turning, boring, drilling, cutting, polishing, fabrication and materials supply for your requirement or projects in KL Kuala Lumpur, Selangor, Klang Valley, JB Johor Bahru, Penang, Malacca (Melaka), Seremban Negeri Sembilan, Perak, Pahang, Kuantan, Kelantan, Terengganu, Perlis, Alor Setar Kedah, as well as Sabah and Sarawak for East Malaysia; besides Malaysia, we are also able to be metal and aluminium fabrication supplier for other countries in Southeast Asia (SEA) such as Singapore, Cambodia, Vietnam, Laos, Myanmar (Burma), Thailand, Indonesia, Philippines, Brunei.
Submit your metal, aluminium and steel sourcing requirements either you are looking for a steel and metal building material supplier in KL Kuala Lumpur, Selangor or other states in Malaysia. Purchase your metal and steel product Malaysia today, submit your enquiry to us today at info@aathaworld.com or call (whatsapp) to +(60)11-7001 1003 (Monday to Friday) or +(60)11-1188 1003 (Saturday, Sunday & Public Holiday).
Photo credit: spanish.aluminiumextrusionprofile, spanish.heavysteelforgings, tribunadamadeira, abellyinternational, newshawktime, thegastankstore
Comentarios