CONSTRUCTION CHEMICALS
Beside construction chemicals, industrial usage chemicals are also equally important to be applied together with cement, concrete or other materials in infrastructure, building or mechanical parts.
-
Concrete Repairs
-
Sealants
-
Prepacked Concrete & Mortar
-
Protective Coatings
-
Highway Repairs and so on.
-
Admixtures
-
Waterproofing System
-
Engineering Grouts
-
Industrial Floor Surfaces
-
Surface Treatment
Industries coverage from Residential, Commercial, Retail, Construction, Oil & Gas, Marine, Rental Solutions to Industrial such as Manufacturing, Mechanical & Electrical (M&E).
ADMIXTURES
Plasticizer Crystalline Admixture Waterproof additive (plaster)
Polyester Fibre Reinforcement Fibre Reinforcement Water reducer & Retarding
A material other than water, aggregates, or cement that is used as an ingredient of concrete or mortar to control setting and early hardening, workability, or to provide additional cementing properties.
-
Increase the compressive strength
-
High workability, shorten set time of concrete
-
High performance and durability parameters
-
Reduce the required cement in concrete
-
Reduce the early heat of hydration to solve thermal cracking in concrete
-
Reduce the cost of concrete construction
-
Modify the properties of hardened concrete to ensure quality
Features
Application
>
>
>
>
>
Ready-mix
Precast
Site-batch
Retarding
Accelerating
>
>
>
>
>
Plasticizer
Water Reducer
Air-entraining
Bonding
Waterproofing & damp proofing
​
WATERPROOFING SYSTEM
Cementitious Waterproofing Liquid Waterproofing Membrane Bituminous Membrane
Bituminous Coating Polyurethane Liquid Membrane
Waterproofing is to convert an object to be resistant or proof against water, to protect a specific content, structure integrity or properties to be affected from water. It prevents building from damage which is caused by water penetration, exposure and humidity.
Availability
-
Micro-silica base (hydrophobic penetrating)
-
Polymer modified cementitious coating
-
Insulating polymerized coating
-
Water based elastomeric membrane
-
Bituminous torch-on membrane
-
Polyurethane(PU) based tough elastomeric membrane
-
Spray, trowel, cold applied (fibre reinforced, bitumen emulsion etc.)
-
EDPM (ethylene propylene diene terpolymer) membrane
-
Universal silicon base water repellent
Application
Benefits
>
>
>
>
>
Basement / Carpark
Roof / Wall / Floor
Bathroom / Pool / Fountain
Water Tank / Reservoir
Infrastructure & Mechanical
>
>
>
>
>
One part multiple function
Breathable surface (air evaporable)
Simpler to apply, wider coverage
High resistance to heat, UV & chemical
Green, no toxic & low cost
Tiling Grout Non-shrink Grout Thixotropic Grout Structural Grout Resin Grout
Grout is basically a mixture, fluid form for combination of cement, water and sand to fill in gaps. It is commonly applied voids between steel and masonry, tiles or mosaics to secure the bonding between objects.
Features
-
Fast setting, self levelling and curing
-
Vibration and corrosion resistant
-
Reduce the ratio between water & cement
-
Ready to use, free flow and easy to apply
-
Non-toxic, non-metallic and chloride free
-
Excellent adhesion to steel & concrete
-
Superior strength and durability
>
>
>
>
>
Application
Bolt / Stud / Bar
Rail / Fence / Track
Tile / Plate / Cable
Crane / Stanchion / Grider
Infrastructure & Mechanical
​
​
ENGINEERING GROUTS
Epoxy Self Leveling Screed Self Smoothing Hardwearing Abrasion Resistant Monolithic Seamless Cementitious Anti-Slip Urethane
From epoxy to self-leveling compound, from normal purpose to heavy duty, from lab flooring to truck pathway; industrial floor surface chemicals are able to save you from headache in dirt cleaning, crack, uneven level of floor or other maintenance.
Features
-
Fast setting, self levelling and rapid hardening
-
Heavy duty, monolithic bond with concrete base
-
Resistant to oil, dust, abrasion and rust
-
Many colours, free flow and easy to apply
-
Non-toxic, non-metallic and iron free
-
Vapor permeable, cost effective, low maintenance
-
Superior strength and durability
>
>
>
>
>
>
Lab / Hospital / F&B / Pharmaceutical
E&E / Garage / Loading Bay
Warehouse / Factory / Workshop
Commercial Building / Offices / Shoplot
Carpark / Engineering / Power Station
Trucking Lane / Subway / Abattoir
Application
INDUSTRIAL FLOOR SURFACES
Aluminized Resin White Pigmented Wax Spray Soil Stabilizer Mould Agent
Modifying the surface (normally is concrete in construction) through chemical to the intended purpose and appearance. It can be anti-slip, eliminate air pocket, water repellent, rainproof, anti-rust or dust, abrasion resistant and many others including for formwork and concrete mould.
Features
-
Single coat application is workable, versatility
-
Non-toxic, non-flammable & chloride free
-
Some eliminates use of water, easy to apply
-
Hardwearing, easy maintenance and cleaning
-
Minimize risk of drying shrinkage, cracks & dusty
-
Lower consumption and more coverage
>
>
>
>
>
>
Base Floor / Screed / Sloped Slab
Vertical Structures / Granolithic Topping
Pavement / Runway / Bridge Deck
Tower / Chimney / Canal Lining
Column / Beam / Formwork / Mould
Precast / Prestressed / Cast-in-situ
Application
SURFACE TREATMENT
Cementitious Epoxy Resin Injection Corrosion Structural Reinforcement Hardener Acrylic Polymer Styrene Butadiene Rubber (SBR)
Concrete cracks, meaning any defects that might affect the strength of structure, cause water leaking or other potential subsequences. Type of cracks are as follow, plastic-shrinkage crack, crazing or map crack/check, hairline crack, pop-outs, scaling, spalling, d-cracking, offset crack, diagonal corner crack.
Features
-
High tensile, compressive & flexural strength
-
Ensure water tightness from treated cracks
-
Excellent adhesion & squeezability to multiple material
-
Quick curing, long workable time & easy to use
-
Wide range temperature applications
-
Dust proof, reduce staining, easier to clean
-
Reduces shrinkage & non-slump consistency
-
Prolonged corrosion protection
Application
>
>
>
>
>
>
Primer / Screed / Topping
Render / Mortar / Slip Brick
Carpark / Corridor / Tile
Corrosion protection
Fresh & Existing concrete
Warehouse / Factory / Platform
CONCRETE REPAIRS
Acrylic Resin Paint Polysulfide Polyurethane Silicone Tile Epoxy Insulation
Sealant is used to block the fluids to pass through joint, surface or an opening, in order to make it airtight or watertight. It can also be applied for smoothing and filling. However, the main difference between adhesives and sealant is that the adhesive has higher strength and lower elongation than sealant. In construction, sealant usage includes blocking dust, heat and sound transmission.
Features
-
Excellent weather & temperature resistance
-
Superior adhesion on different substrates
-
Fast curing, maintenance free, durable
-
Acidic, alkali, chemicals resistance
-
Low shrinkage & high tolerance to movement
>
>
>
>
>
>
>
>
Automotive / Aerospace / Engine
Pipe thread / Tyre / Radiators
Cement / Concrete / Casting
Gaskets / Glass / Acrylic
HVAC / Hydraulic systems
Aquarium / Marine / Military grade
Reservoirs / Tunnel / Tank
Asphalt / Wood / Roof
Application
SEALANTS
Ceramic tile mortar Adhesive Grout Tile mortar Waterproof wall putty
Fiber reinforced plaster Cementitious
Prepacked aggregate concrete (PAC) commonly being used when conventional concrete is exceptionally challenging, the coarse aggregates are first placed within formworks before the grout is pumped from underneath. Grout properties such as consistency, density, compressive strength and bleeding. Mortar is a workable paste applied between bricks, stone or other material with concrete masonry, it is also used for filling and sealing up the gaps.
Features
-
Can fix tile on tile & excellent adhesion
-
Able to fix acoustic & insulating board
-
High resistance to impact & abrasion.
-
Chemicals & good slip resistant
-
Low odour, fast setting & durable
-
Extended open time & easy to use
-
Some even no curing is required
-
Self level & fire resistance
-
Prevents algae and fungi growth
>
>
>
>
>
>
>
>
>
Plywood / AC Sheet
Precast & concrete structure
Sand cement plaster
Block / Brick / Gypsum Board
Old painted area / concrete
Mosaic / Ceramic / Marble
Unlevel / Wooden Floor
Infrastructure / Mechanical
Warehouse / Factory / Residential
Application
PREPACKED CONCRETE & MORTAR
Anti-carbonation Aesthetic Finish Anti-Corrosive Hardwearing Waterproof Epoxy Primer/Sealer
It is normally applied onto the surface of an object, normally known as substrate. It is for functional, decorative or for both sometimes. It can be used on interior or exterior surface, textured, many options in colours, non-toxic, non-flammable, and good resistant to diverse environment situations. Superior resistant long term immersion to chemicals such as petrol, oil, diluted acid or alkali, water and so on.
Features
-
Organic solvent free
-
Excellent adhesion to dry & damp surfaces
-
Anti-graffiti, dust proof
-
Taint free, low odour, impervious finish
-
Weather resistant & waterproof
-
Pre-packed and easy to apply
-
Breathable surface (air molecule can evaporate)
>
>
>
>
>
>
>
Floor / Wall / Ceiling
Steel (i.e. rebars) / Concrete
Food Factory / Laboratory
Pharmaceutical / Dairies
Workshop / Reservoir
Chemical Bonds
Abattoirs / Subways
Application
PROTECTIVE COATINGS
Bitumen Macadam Cementitious Mortar Epoxy Aggregates Hardener
HIGHWAY REPAIRS
By the name itself, we know that it is used to repair concrete brickwork, masonry, damp and undulation of the roads. Before apply, it normally requires base, hardener and aggregates to be mixed at the site or prepacked before to site.
Features
-
Low viscosity & high penetration
-
Usable on for damp or dry surfaces
-
Ultra bond strength to concrete, brick & masonry
-
Excellent impact resistant & permanent repair
-
Quick setting, rapid repair time & less labour
-
Shorten the time open for traffic
-
No peel, dust, crumble, shrink or crack
-
Better grip with old concrete surface
>
>
>
>
>
>
Existing Road / Concrete Floor
Concrete, Brick & Masonry
Spalled & damaged road
Gutter / manhole cover
Support of road furniture
Carriageway / Footway / Cycle Path
Application